Turn vape

The way to turn on an electronic cigarette mainly depends on the type of your device, but the most common method is to press the power button quickly and continuously 5 times within 2 seconds.

Here are the specific operation methods for different types of devices:

Button-type electronic cigarettes (most common)
This type of device requires pressing buttons to turn on and activate the heating.

Power on: Within 2 seconds, press the power/light button quickly and continuously 5 times. The device indicator light flashes or vibrates, indicating successful power on.

Use: While holding the power button, gently inhale through the mouthpiece.

Power off: Similarly, press the power button 5 times quickly to turn off.

Advanced functions: Some devices can switch voltage or power mode by pressing the power button 3 times consecutively, or start the preheating function by pressing it 2 times.

 Inhale-sensing electronic cigarettes (without buttons)
This type of device has no physical buttons and is activated by inhaling.

Usage: Place your lips close to the mouthpiece and gently inhale to automatically start.

Note: Before using for the first time, please check and remove any protective stickers or sealing plugs on the cigarette cartridge to avoid affecting the airflow.

Heating non-combustible products (such as IQOS, glo)
These products generate smoke by heating tobacco rather than e-liquid.

IQOS (taking the ILUMA series as an example):

Power on: Press the power button of the portable charging box for 4 seconds and then release.
Heating: Insert the dedicated cigarette cartridge into the heating rod, and the heating rod will automatically start; or press the heating rod button for 1 second to start.
Use: When the heating rod vibrates and the indicator light is constantly on, you can start to inhale.
glo (taking the Hyper Pro as an example):

Power on and heating: Press the power button for about 3 seconds, and the device will vibrate and light up, indicating that heating has started.
Use: After heating is complete, you can directly inhale.

Supplementary Tips
Charge before use: It is recommended to fully charge the device before first use.

Regarding e-liquid: If it is an e-liquid injectable device, be careful not to fill it too full. Usually, fill it to 70%-80% of the cigarette cartridge capacity. For new atomizers, it is best to let them stand for 5-10 minutes to fully absorb the e-liquid to prevent dry burning.

Breathing technique: For beginners, it is recommended to use the "mouth inhalation" (MTL) method, that is, first inhale the smoke into your mouth and then into your lungs, which is closer to the smoking method of traditional cigarettes.